LET’S TALK ABOUT UPS (Uninterruptible Power Supply)
LET’S TALK ABOUT UPS (Uninterruptible
Power Supply)
One of the most
important investments you can make when you purchase a computer, is an UPS. Protect
your hardware and data loss; increasing user productivity. When the electrical
current going to your device is not steady, it can have dire consequences for
your PCs and home entertainment systems. Common issues relating to voltage
include blackouts, brownout, noise, spikes, and power surges. Mother Nature
will have her moments; it’s just a fact of life.
SUGGESTED BRANDS:
- APC
- CyberPower Systems
- Eaton Corporation
- Eaton Power
- HP
- IBM
- Minute man
- Minuteman UPS
- Para Systems - Minuteman
- Tripp Lite
NOTE: this list is an incomplete list and suggested brands, depends
and may varies on your country.
HOW DOES IT WORKS
Before we define
the issues related to voltage irregularity, let’s find out what a UPS is and
how it works. A UPS is a device that provides consistent backup power during
inconsistent power issues. The UPS can protect both data and the computer
equipment connected to it by stabilizing the voltage passing through. A UPS
comes in a range of sizes and models that target different types of equipment.
Some of these include the UPS itself, Surge suppressor, and SPS. Knowing the
right one to use is essential for the protection of the equipment you use.
POWER PROBLEMS, HOW MANY?
BLACKOUT: Also called a “power cut” can happen when a
transformer is damaged or a downed power line. Software improvements over the
years have improved when situations like this occur. If you used earlier
Windows 95 or 98, you might remember that when a power outage occurred, and you
started up your PC, it would perform a diagnostic test. With the introduction
of Windows NT and NTFS, Windows recovers from the event easier.
BROWNOUT: This happens when there is an overload of electrical
circuits. If you have a lot of electrical equipment connected and in use at the
same time, this can trigger a brownout resulting in a loss of power. The issue
usually lasts for a short period, but it can cause damage to your device.
NOISE: Commonly caused by interference from lightning and
generators; resulting in unclean power going to your devices. It can cause the
operating system and applications to malfunction and possibly corrupt files.
SPIKE: A sudden increase in voltage lasting only a short
time. Common causes of this are lightning or restoration of your power after a
widespread outage. When this happens, what I normally do is unplug all my
electrical equipment. When the power returns, I wait a bit for the voltage to
normalize before I reconnect the equipment. Some electric companies will notify
you if there is going to be a planned outage for maintenance.
POWER SURGE: A dramatic increase in voltage caused by
household appliances such as a refrigerator or air conditioners. Surges last a
very short time, but can cause significant damage to computer components.
WHAT HAPPENS IF DON’T?
You might notice,
in the descriptions of these different voltage disturbances, a lightning storm
is usually the biggest threat to your equipment. What exactly does the
lightning do that makes it hazardous to your equipment? When lightning strikes
a transformer, it can trigger a powerful surge, which travels instantaneously
through the wiring going to your house. The surge moves to your computer from
the outlet or data lines. The first component that usually dies in your PC is
the motherboard. This effect can also trigger a wave of other voltage issues
that damages other components in your PC, like the hard drive and RAM.
HOW AND WHAT TO CHOOSE
Protecting your
equipment is not a one size fits all approach. There are many solutions
available on the market that target different environments, including a home,
office, or a large data center. Here is a list of what to look for when
purchasing a UPS for the home.
- A UPS is a significant investment, ensure there is a lifetime warranty included with your purchase. I have owned a UPS since 2005, even though the battery died a few years ago, I was able to get a replacement battery at a small fraction of the cost purchasing a new one.
- Supports up to eight outlets for various equipment. I have two computers on all the time; some UPS equipment will include one battery backup in addition to surge protection; while having extra outlets with only surge protection. In scenarios like this, I will only keep the most important device connected to the battery outlets on the UPS.
- The backup power that’s immediate in case of a power outage.
- Your UPS should support protection of other devices such as a network, serial port and data connections.
- Complete surge suppression that filters out an unreliable voltage that could damage equipment.
- Site wiring fault indicator to ensure that your equipment is properly grounded.
- Noise filtration preventing data corruption.
- Other features and functions to look for including a battery replacement indicator, battery management, intelligent features such as automatic save and shutdown. This might be available only on more expensive models.
Home computing
has evolved over the years; it is not unusual for some users to own a home
server and other equipment such as a Network Attached Storage (NAS) device. For
such configurations, investing in a UPS will require more research on your
particular needs. The most obvious being the need for a more a powerful UPS
that can handle the demands.
A media server
works similarly to a file server used in an office. They are constantly saving,
retrieving or processing information like streaming to your smart TV or mobile
devices. Such events can lead to a catastrophic loss of data if a power outage
occurs. For such setup’s, you should first consider investing in a UPS with
options such as battery replacement, the ability to hot swap a battery, and
intelligent battery features. Integration with your backup tools is also a
function of the UPS you should look at getting.
SAMPLE IMAGE, NOT A VALID OR PUBLICITY IMAGE |
FUNCTIONS, FUNCTIONALITY AND OTHER ASPECTS
Having a UPS will
prevent damage to your equipment, but predicting when such events might occur
is usually beyond your control. By having the option to gracefully shutdown
provides protection against data loss. These features are commonly available in
the accompanying software that comes with your UPS. Make sure you check for the
follow features when making your purchase:
- Automatic shutdown
- User notification of power loss
- Customization shutdown commands
- Conservation mode.
- Battery replacement warning.
- Management tools: status display, runtime, event log, remote management via the web or remote computer
- Environmental: temperature, humidity
Of course, all
the mentioned options before, depends on your BUDGET.
Ask yourself How much does your
information and data COST?
OPERATING YOUR UPS BACKUP PROPERLY
Using your UPS
effectively is important. Some users might believe, a UPS means the fun will
never stop, meaning, you can keep playing, listening to songs, or just leave
the computer running idle. Nope. What you should do is use the opportunity to
shut down the equipment gracefully. Some UPS devices will provide up to 1 hour
of backup power. Use this time to shut down and power off all equipment.
One device you
should never plug into a UPS is a printer. Doing so can cause the printer motor
to burn up. A printer will queue whatever jobs there are to print. When the
power returns, it normally resumes printing. A simple surge protector should be
enough.
Owning computing
equipment is a major investment and protecting it should be a top priority.
NOTE: This article is for a desktop computer, a laptop does NOT NEED a UPS and only depends if the laptop has a DOCKING STATION and this will provide AC to all components attached. Example:
WHAT ABOUT SURGE PROTECTORS
At the very
minimum, you should definitely be connecting your computer and home
entertainment devices to a surge protector. A surge protector doesn’t provide
any power backup, but will protect your equipment from damage.
PERSONAL EXPERIENCE: one time in a company, we were running out of budget... and what we do was to share a UPS. How? simple, just plug 2 CPU without monitors and from the end of the software, configure ALL to save every minute. once you are in a power outrage, you can turn off the computer pushing the power button and everything you were working, gonna be save. Of course, this is not a solution for professionals, but sometimes requires other "technics".
Is not a smart and quite solution, but works until you can add/replace UPS.
DID YOU LIKE THIS ARTICLE? Let me know your comments and thoughts.
Comments
Post a Comment